The Stainless Steel AVW - Z - Dual Wrap w/Dual Mini Mitter Combo and the best Mini Mitter combined in one unit ideal for space savings in tunnels and clean appearance desired in longer tunnels. Z-Wrap Around operate gravity. No complicated controls, because of the Design it can self adjust to most conveyor speed requirements. Simple design is constructed of heavy grade Stainless steel. Van High brush height is ideal for vans and sport utility vehicles because it cleans the sides with smooth even pressure.The AVW Contour is constructed of heavy grade Stainless steel designed to rotate reverse of the AVW Wrap Around and to provide constant pressure to the side of vehicles. Compact cleaning (12’) Retract kit is available
In order to get a higher application pressure at either driver side or passenger side of the machine, move the
bottom bearings towards the its center, or away from the center to achieve lower application pressure.
In order to get a higher application pressure at either driver side or passenger side of the machine, move the
bottom bearings towards the its center, or away from the center to achieve lower application pressure.
Brush climb up on back ends of the car
Possible Causes & Troubleshooting:
• The car is rolling ahead because of uneven floor and stopping with wrap on rear of car.
• Torque (Pressure) is set too high and brush will not stall as it climbs.
• Brush speed may be too fast. set at 60 RPM
• Brush may be set to travel more than 3/4 of backend of car / more swing after break- in period.
• Keep pivot point low as possible try not to mount over tire brushes or where high clearance is needed off the
floor.
• Car may be stopping or rolling because of a treadle on floor or pocket in floor
• If the friction is too high-apply more soap or lubrication.
• The faster the brush RPM, the more travel on the back of the vehicle-adjust RPM
Mirror is damaged or broken
Possible Causes & Troubleshooting:
• Lower portion of the brush is set to high coming into contact with mirrorstay below 33” from the top of the lower fuller section of the brush.
• Arm is restricted not to swing out far enough to clear the vehicle-adjust the
bumper so that brush can clear the vehicle.
• Too much tilt on the bearing causing excessive side pressure –adjust the tilt
on the bearing to reduce the pressure.
• Weak shocks absorbers-replace shock absorbers.
• Brush speed incorrect-set the speed.
Short description:
The Stainless Steel AVW - Z - Dual Wrap w/Dual Mini Mitter Combo and the best Mini Mitter combined in one unit ideal for space savings in tunnels and clean appearance desired in longer tunnels. Z-Wrap Around operate gravity. No complicated controls, because of the Design it can self adjust to most conveyor speed requirements. Simple design is constructed of heavy grade Stainless steel. Van High brush height is ideal for vans and sport utility vehicles because it cleans the sides with smooth even pressure.
Product Features:
For Wrap Around: Displacement 12.05cu.in./rev., 18GPM, 60 RPM)
Water: ½” NPT Outlet Equipment Center Line
For Mini Mitter: 3.6GPM, 60RPM
Water: 1/2’’NPT, 3GPM
Hydraulic Motors
For Contour Brushes: Displacement 5.0cu.in./rev. (= 1.3GPM at 60RPM, RPM is adjustable)
SKU Details
Part#
WA1FC
Data Source
Purchased
Tags
Quickbooks,Parts Diagram PDF,Best Sellers - Danka
Diagram Part #
-
Quantity
8
Price
$14.00
This SKU is a part of these products:
CONTOUR BRUSH - KAADY Style, Model CB2 - Driver Side
CONTOUR BRUSH - KAADY Style, Model CB2 - Passenger Side
MM5-R-0818 Retractable Mini Mitter
2WAMC2 DUAL Z-WRAP MITTER COMBO
MODEL DWACB0405 DUAL Z-WRAP with CONTOUR COMBO
FM1 Finishing Module - Passenger Arm Assembly
FM1 Finishing Module - Driver Arm Assembly
FM1 Finishing Module - Other Driver Side Assemblies
FM1 Finishing Module - Other Passenger Side Assemblies