(708) 926-9567
Celebrating 10 Years of Excellence in Car Wash Chemicals and Car Wash Construction
FM1 Finishing Module - Heater Section - Passenger Side Assemblies
SKU Details
| Sku Images | Part# | Description | Diagram Part # | Quantity | ADDTOCARTDETAILSANDPRICE |
|---|---|---|---|---|---|
| TB1BDC | ROLLER GUIDE SET (PUSH BAR) | 10.51 | 1 | ||
| TB1BDC4-0209 | Collars 3/4’’O.D. x 1-1/4”O.D. x 7/8W | 10.53 | 1 | ||
|
|
TB2BD2 | Bumper Front, 10”LG | 10.54 | 1 | |
|
|
TB2BD2-0809 | ENTRANCE COVER (FRONT) | 10.56 | 1 | |
|
|
TB2BD3-0809 | EXIT COVER (REAR) | 10.68 | 1 | |
| TB2BD3A-2636 | Motor Guard | 10.64 | 1 | ||
| FM1D | CROSSBARS 2”x4”x7Ga x 43-3/8”LG. | 2 | 4 | ||
| HT2 | HEATERS | 4.1 | 2 | ||
| J4005 | Nozzle, 90° Exit Elbow, for FInishing Module Heater, SS, Includes Fasteners to Door Jet Heater Flange | 4.2 | 2 | ||
| HT2A | MOUNTING BRACKETS (OUTER) | 4.4 | 2 | ||
| HT2B | MOUNTING BRACKETS (OUTER) | 4.4 | 2 | ||
| HT21 | MOUNTING BRACKETS (INNER) | 4.5 | 2 | ||
| HT22 | MOUNTING BRACKETS (INNER) | 4.5 | 2 | ||
| WA1M-5/10x72 | BRUSH ASSEMBLY (design: 5” core, 72”lg.) | 7 | 1 | ||
| SW8K | BRUSH SHAFT ASSEMBLY | - | 2 | ||
| SW8KA | Motor Mount | 6.1 | 2 | ||
| SQHS1213150 | Square Head Screw ½” – 13 x 1½” LG. (for sleeves) | - | 8 | ||
| HHCS3816075 | w/Hex Head Screw | - | 8 | ||
| NLN3816 | Nylon Lock Nuts | - | 16 | ||
| SAE070202-8-8 | Fitting 90° elbow ½” NPTM x ½” JIC | 6.2 | 2 | ||
| WA1K1 | Torque Plate | 6.3 | 4 | ||
| WA1KCB | 4-bolt Bearing 1 ½” | 6.5 | - | ||
| WA5KB-9 | Brush Shaft Æ1½”x10-1/2”lg. | 6.4 | 4 | ||
| HHCS1213175 | Hex Head Cap Screw ½” – 13 x 1 ¾” lg. | - | 8 | ||
| FW12100 | Flat Washer ½” I.D. x 1” O.D. | - | 8 | ||
|
|
SLW12 | Split Lock Washer 1/2” | - | 16 | |
| TB1ADE-4B-94-CUS999 | BRUSH SET | 10.1 | 1 | ||
| TB1ADEA-4B-104-CUS999 | BRUSH Ø8’’x104’’lg | - | 1 | ||
| TB1ADEB-4B | 4-BOLT SPINDLE | - | 2 | ||
| TB2MH-CUS999-1216 | COVER w/HINGES | 10.2 | 1 | ||
| TB2M-CUS999-1216 | APPLICATION MANIFOLD ASSEMBLY | 10.3 | - | ||
| UN075175-TB2M | HOLDER ( w/UNISTRUT AND CLAMP) | - | - | ||
| CHC050-SS | CLAMP 1/2” | - | 1 | ||
|
|
TB1AD1-4B | DRIVE SHAFT Ø 1-1/4’’x6’’LG | - | 2 | |
| SHCS3816100F | SOCKET HEAD CAP SCREW | - | 8 | ||
| TB2AD-4B-0810 | BRUSH -RACK SUPPORT FRAME ASSEMBLY: | 10.61 | 1 | ||
|
|
WA1KM | Hydraulic Motor, displacement 11.9 [cu.in./rev.] | 10.62 | 1 | |
| TB2ADA-4B-0810 | BRUSH SUPPORT FRAME- (RACK) | - | 1 | ||
| TB2ADAA-4B-0810 | FRAME | - | 1 | ||
| TB2ADABA-4B-0810 | ADJUSTABLE PUSH BAR | - | 1 | ||
| CBS3816125 | CARRIAGE BOLT 3/8’’-16x1-1/4’’LG | - | 4 | ||
| TB1ADDA | TAPPED BASE BEARING 1-14’’ | 10.7 | 2 | ||
| HHCS71614075 | Hex Head Cap Screw 7/16’’- | - | 4 | ||
| SLW716 | Split Lock Washer 7/16’’ | - | 4 | ||
| APS1-2F | AIR PUMPING STATION w/2 FLOJET | - | 1 | ||
| APS1F | FLOOJET PUMP | - | 2 |
©2009-2024 EDJ Chemicals. All Rights Reserved.